Medical Engineering Plastics

We act as an agent for and produce high-end medical engineering plastics, providing safe and high-performance base materials for medical products. Our product range covers various types to meet the special requirements of different medical devices.

Product Features:

- Complete range of material types

- Stable quality

- Excellent product performance

- Good biocompatibility

- Suitable for various molding processes

Technical Parameter Summary Table

Radel® R-5000 Performance Data Sheet

Product Basic Information

Product Description：Radel® R-5000 is a transparent polyphenylsulfone (PPSU).

Material Type：Polyphenylsulfone (PPSU)

Manufacturer：Solvay Specialty Polymers

Supply Regions：North America, Europe, Latin America, Asia Pacific

Characteristics：Ultra-high toughness, dimensional stability, electrical properties, good thermal stability, gamma radiation resistance, electron beam sterilization, thermal sterilization, ethylene oxide sterilization, good heat aging resistance, good chemical resistance, biocompatibility, alkali resistance, hydrolysis stability, high ESCR (environmental stress crack resistance), high heat resistance, acid resistance, steam resistance, detergent resistance, flame retardancy

Applications：Films, surgical instruments, medical equipment, automotive applications, dental applications, medical devices, food service applications, medical/nursing supplies

Certifications：FAA FAR 25.853a, NSF 51, ISO 10993, NSF 61

Processing Methods：Film extrusion, extrusion molding, blow molding, sheet extrusion, injection molding, machining, thermoforming

Physical Properties

Property Item Test Conditions Rated Value Unit Test Method Remarks
Density / Specific Gravity--1.29g/cm³ASTM D792
Melt Flow Rate (MFR)365°C/5.0 kg14 to 20g/10 minASTM D1238
Shrinkage Rate - Flow0.125 in (3.18 mm)0.70%ASTM D955
Water Absorption24 hr0.37%ASTM D570
Water AbsorptionEquilibrium1.1%ASTM D570

Mechanical Properties

Property Item Test Conditions Rated Value Unit Test Method Remarks
Tensile Modulus0.125 in (3.18 mm)2340MPaASTM D638
Tensile Strength0.125 in (3.18 mm)69.6MPaASTM D638
Elongation at Yield0.125 in (3.18 mm)7.2%ASTM D638
Elongation at Break0.125 in (3.18 mm)60 to 120%ASTM D638
Flexural Modulus0.125 in (3.18 mm)2410MPaASTM D790
Flexural Strength5.0% Strain, 0.125 in (3.18 mm)91.0MPaASTM D790

Impact Properties

Property Item Test Conditions Rated Value Unit Test Method Remarks
Izod Notched Impact Strength0.125 in (3.18 mm)690J/mASTM D256
Tensile Impact Strength0.125 in (3.18 mm)399kJ/m²ASTM D1822

Thermal Properties

Property Item Test Conditions Rated Value Unit Test Method Remarks
Heat Deflection Temperature Under Load264 psi (1.8 MPa), Unannealed, 0.125 in (3.18 mm)207°CASTM D648
Glass Transition Temperature--220°CASTM E1356
Linear Thermal Expansion Coefficient - Flow0.125 in (3.18 mm)5.6E-5cm/cm/°CASTM D696

Electrical Properties

Property Item Test Conditions Rated Value Unit Test Method Remarks
Volume Resistivity--9.0E+15ohms•cmASTM D257
Dielectric Strength0.00100 in (0.0254 mm)> 200kV/mmASTM D149
Dielectric Strength0.125 in (3.18 mm)15kV/mmASTM D149
Dielectric Constant0.125 in (3.18 mm), 60 Hz3.44--ASTM D150

Flame Retardant Rating

Property Item Test Conditions Rated Value Unit Test Method Remarks
UL Flame Rating0.030 in (0.76 mm)V-0--UL 94

Optical Properties

Property Item Test Conditions Rated Value Unit Test Method Remarks
Refractive Index--1.672--ASTM D542

Injection Processing Parameters

Property Item Test Conditions Rated Value Unit Test Method Remarks
Drying Temperature--149°C--
Drying Time--2.5hr--
Processing (Melt) Temperature--360 to 391°C--
Mold Temperature--138 to 163°C--
Screw Compression Ratio--2.2:1.0----

Extrusion Processing Parameters

Property Item Test Conditions Rated Value Unit Test Method Remarks
Drying Temperature--171°C--
Drying Time--4.0hr--
Barrel Zone 1 Temperature--338 to 388°C--
Barrel Zone 2 Temperature--338 to 388°C--
Barrel Zone 3 Temperature--338 to 388°C--
Barrel Zone 4 Temperature--338 to 388°C--
Barrel Zone 5 Temperature--338 to 388°C--
Adapter Temperature--327 to 371°C--
Melt Temperature--343 to 399°C--
Die Temperature--327 to 371°C--

Radel® MS NT1 AM Filament Performance Data Sheet

Product Basic Information

Product Description：Radel® MS NT1 AM Filament combines the advantages of sulfone polymers, exhibits excellent toughness and impact strength, has high temperature resistance, and has been proven to be superior to PSU (Polysulfone) and PEI (Polyetherimide) in chemical resistance.

Material Type：Polyphenylsulfone (PPSU)

Manufacturer：Solvay Specialty Polymers

Supply Regions：North America, Latin America, Asia Pacific, Africa and Middle East, Europe

Characteristics：Ultra-high toughness, alkali resistance, good thermal stability, good impact resistance, high heat resistance, flame retardancy, good chemical resistance, acid resistance

Applications：Additive Manufacturing (3D Printing), smart devices, medical/nursing supplies, aerospace applications, energy storage

Processing Methods：3D Printing, Fused Filament Fabrication (FFF)

Physical Properties

Property Item Test Conditions Rated Value Unit Test Method Remarks
Density / Specific Gravity--1.29g/cm³ASTM D792

Mechanical Properties

Property Item Test Conditions Rated Value Unit Test Method Remarks
Tensile Modulus--2000MPaASTM D638
Tensile Strength - Yield--62.0MPaASTM D638
Tensile Strength - Break--42.0MPaASTM D638
Elongation at Yield--7.0%ASTM D638
Elongation at Break--21%ASTM D638

Impact Properties

Property Item Test Conditions Rated Value Unit Test Method Remarks
Izod Notched Impact Strength--480J/mASTM D256

Thermal Properties

Property Item Test Conditions Rated Value Unit Test Method Remarks
Glass Transition Temperature--220°CDSC

Supplementary Information

Property Item Test Conditions Rated Value Unit Test Method Remarks
Diameter--1.75mm--

Printing Conditions

Property Item Test Conditions Rated Value Unit Test Method Remarks
Drying Conditions - Minimum Temperature4h150-170°C--
Extrusion Temperature--380-400°C--
Build Plate Temperature--180-200°C--
粤ICP备2026016305号